EDI with The Brick: required supply chain documents

EDI with The Brick: required supply chain documents

  EDI with The Brick and their Supply Chain EDI implementation


You have finally landed the Brick as an account and you need to get your product in their stores across Canada! The catch, however, is that you need to be EDI compliant and comply with the Brick’s EDI supply chain requirements. Where do you start?  What do you need to know?

This blog will touch on key information and business rules you should be aware of when undertaking an EDI initiative with The Brick.


What are the EDI transactions required by The Brick

For starters, what is EDI and why does the Brick require it? Electronic Data Interchange (EDI) refers to the structured transmission of data between organizations electronically. Benefits of transmitting documents through EDI will be seen in many areas, including reduced time and payment delays, reduced labour costs, improved data and inventory accuracy, increased information accessibility, and ultimately, facilitated business activity.

The following are The Brick’s required EDI transactions:


EDI Transactions with The Brick



How to test your EDI compliance with The Brick

Once you set-up for EDI with The Brick, you will need to complete a testing cycle with their third party testing partner.  It is quite common for retailers to mandate the testing process to a third party who will manage the testing of all required EDI transactions on the retailer’s behalf, based on the retailer’s specific EDI requirements and business rules.  Having tested all the EDI transactions will ensure a degree of compliance once the supplier is fully deployed and in production.  A supplier will not be moved to production, and therefore, will not be able to receive production purchase orders (EDI 850) until all the EDI transactions have been tested successfully and deemed compliant by the mandated third party testing partner.

Depending on your in-house EDI capabilities, you will be able to either complete the testing directly with their third party testing partner, or opt to acquire the services of a third party EDI provider, such as EDI Gateway Inc for example, to handle the testing cycle on your behalf, using its fully EDI compliant tools. Third party EDI providers typically embed validation maps in their back end systems to allow the tools they use to detect non-compliance errors and, therefore, ensure that the outgoing EDI data that is transmitted to the retailers is 100% EDI compliant with the latter’s business rules and guidelines.

If you are integrated or planning on integrating your EDI and using your in-house EDI system to transmit EDI documents to the Brick, we highly recommend familiarizing your team with the Brick’s vendor manual so to avoid unnecessary non-compliance charges.

If however you are using a 3rd Party such as EDI Gateway, sending and receiving your EDI Transactions in a Web EDI portal such as Webgate+  will embed most validation for you.


How does the EDI transactional flow work?

  • Once testing is completed successfully, the third party testing partner will coordinate with The Brick a go live date for EDI, at which point you will begin to receive production EDI 850s (purchase orders).  The EDI 850 is a Purchase Order transaction set, used to place an order for goods or services. The 850 generally provides the same information you would typically find in a paper Purchase Order (PO) document.
  • When receiving a Purchase Order (EDI 850), you must send back a Purchase Order Acknowledgement (EDI 855) within the time delay specified in your vendor manual. The 855 transaction is used by sellers to confirm the receipt of a purchase order (EDI 850) from a buyer, eliminating the need to call or fax a confirmation. The EDI 855 is transmitted with the intention of communicating to the retailer with an acknowledgement status for a purchase order (EDI 850) received, to either acknowledge as is, cancel or apply changes to the orders for each item.
  • Once you have processed the Purchase Order Acknowledgement (EDI 855), you will likely receive a Purchase Order Change (EDI 860). The 860 is used by buyers to request a change to a purchase order (EDI 850) they previously submitted, or, as in this case, also to confirm the acceptance of changes made by the seller to the purchase order, as reflected in the EDI 855 (purchase order acknowledgement).
  • Upon receipt of the EDI 860 (purchase order change), you will need to submit another final Purchase Order Acknowledgement (EDI 855), accepting the new changes, as communicated on the EDI 860.  The Brick business rules require you to transmit a Purchase Order Acknowledgement for EVERY Purchase Order (EDI 850) and for EVERY Purchase Order Change (EDI 860) you receive.  In addition, all Purchase Order Acknowledgement (EDI 855) must be sent prior to sending any Advance Ship Notices (EDI 856).  These are very important rules to remember!
  • What is Advance Ship Notice (EDI 856)?  The EDI 856 transaction is utilized to electronically communicate the contents of a shipment to another trading partner. It is sent in advance of a shipment arriving at the buyer’s warehouse facility.  It is essentially a detailed report of the shipment. The ASN (EDI 856) must reflect all the changes indicated on both the corresponding EDI 855 and EDI 860. The Brick uses an SOI (Shipment-Order-Item) ASN EDI 856 structure which means that the ASN (EDI 856) must reflect the contents of shipment, as opposed to the content of each carton shipped.  For this reason, the ASN (EDI 856) structure does not include a PACK option, and subsequently, no MH-10/UCC-128 label requirement. The Brick allows to consolidate multiple purchase orders on a single ASN (EDI 856), should you wish to do so.


An important business rule to note is that all ASNs (EDI 856) must be transmitted and received by the retailer, prior to the goods being received at the retailer’s distribution center.  Failure to do so will result in non-compliance charges.  Examples of EDI non-compliance charges include late or no ASN (EDI 856), invalid or missing mandatory data. It is therefore imperative that you coordinate your ASN (EDI 856) your shipping logistics with your DC appointment, to allow for sufficient time to have your goods picked and packed, and your ASN created and transmitted to the Brick.

The final EDI transaction to complete the EDI transaction flow with the Brick, is the invoice (EDI 810). The EDI 810 Invoice transaction set is the electronic version of the traditional paper-based invoice document. Payment processing of EDI 810 invoice is naturally faster than that of paper based invoice as data entry and manual processing is avoided.

You can send an invoice (EDI 810) only once the corresponding ASN (EDI 856) has been transmitted to The Brick.  The Brick will issue payment based on the EDI 810 you transmit. The invoices must reflect the ASN, in other words, the actual shipment.  You cannot consolidate multiple purchase orders on the same invoices.  Each invoice (EDI 810) must correspond to a single purchase order. Finally, you may only apply allowances to the Brick invoices; charges are not accepted.


EDI business rules for The Brick’s vendors

The following are a few key questions we recommend to look out for in your vendor manual or in your discussion with the EDI team at the Brick:

  • What is the allotted time to send an EDI 855 once the Purchase Order (EDI 850) or Purchase Order Change (EDI 860) are received?
  • What is the allotted time to send an 810 invoice once the ASN (EDI 856) has been transmitted?
  • How long before the shipment arrives at the Brick warehouse does the ASN (EDI 856) need to be received in The Brick’s EDI system?
  • Will non-compliance chargebacks be incurred in case of late ASNs (EDI 856), incorrect SCAC code, etc.?
  • How does The Brick communicate the errors when an EDI transaction is rejected?

Having answers and access to relevant information, as well as business rules, you require will allow you to navigate through the challenging world of EDI with better ease.  We trust that this blog has been informative and we wish you luck with your EDI initiative with the Brick!


Follow us on Social Media!

      facebook  twitter  youtube  linkedin  untitledjh-4

Feel free to comment and open up a dialog or discussion !


Sharon Barr

With over 16 years of experience in the EDI retail industry across both Canada and the U.S, Sharon Barr is part of EDI Gateway’s EDI lead team, where her lead role is primarily in EDI integration. This is Sharon’s first Blog!


Web EDI | Differents ways to communicate business documents

WEB EDI : who is it for and why ?

Learn everything about how to transmit EDI documents.

28 Comments to EDI with The Brick: required supply chain documents

  1. Nice blog! Is your theme custom made or did you download it
    from somewhere? A design like yours with a few simple tweeks would really make my blog stand out.
    Please let me know where you got your design. Many thanks

    • Hello Karen, thank you for your interest in our blog. Eros Cannucci will be in touch with you via your email to give you a complete response to your request. Have a great day 🙂

  2. Nice post. I was checking continuously this weblog and I’m
    impressed! Extremely useful info specifically the last part
    🙂 I maintain such info much. I was seeking this certain info for a very lengthy time.
    Thank you and good luck.

    • Thank you for taking the time to comment our blogpost. We are delighted that you found it useful and hope it will help you in your business. Have a wonderful day 🙂

  3. Great goods from you, man. I have understand your stuff previous to and you’re just extremely excellent.

    I actually like what you have acquired here, really like what
    you are stating and the way in which you say it.
    You make it enjoyable and you still take care of to keep it wise.
    I can not wait to read far more from you. This is really a wonderful website.

  4. Excellent items from you, man. I have be aware your stuff prior
    to and you are just extremely fantastic. I actually like what
    you’ve obtained right here, really like what you’re stating and the best way through which you
    say it. You’re making it enjoyable and you still take care of to keep
    it wise. I can’t wait to learn far more from you. This is really
    a terrific web site.

    • Thank you so much for your feedback. We are very touched that you like this blogpost and hope you will like the others to come 🙂

  5. Hi there I am so glad I found your blog page, I really found you by
    mistake, while I was researching on Digg for something else, Anyhow I am here now and would
    just like to say thanks for a tremendous post and a all round entertaining
    blog (I also love the theme/design), I don’t have time to look over
    it all at the moment but I have book-marked it and also
    added in your RSS feeds, so when I have time I will be back to read much more, Please
    do keep up the great work.

    • Hi,
      Thank you very much for subscribing to our RSS feed. We hope that you will like the others blogposts. Also thank you for this very kind comment 🙂
      See you around then !

  6. You’re so cool! I do not believe I have read anything like that before.
    So nice to discover another person with unique thoughts on this subject.
    Really.. thank you for starting this up.

    This website is something that’s needed on the web, someone
    with a little originality!

    • Hello,
      Having feedback like this is a strong motivation for us. Thank you for your comment and have a nice day 🙂

Your Comments: